top of page

How To Apply 2Guard

Applying 2GUARD CLEAR

  1. Prep the surface with 2GUARD PREP CLEANER and 3M Pad Scotch Brite pad. #7445 is best to not damage the surface.

  2. Rinse the cleaner off with water and allow it to completely dry.

  3. Spray, Wipe or Roll apply 2GUARD CLEAR.

  4. 2GUARD CLEAR takes less than 5 minutes to dry.

2GuardPrepCleanerQuart2.jpg

Applying 2GUARD COLOR

  1. Prep the surface with 2GUARD Prep Cleaner or degreaser.

  2. Rinse the cleaner off with water and allow the surface to completely dry.

  3. Make sure there is no loose material or dirt on the surface.

  4. Mask adjacent areas.

  5. Shake and stir 2GUARD COLOR before application.

  6. Spray apply 2GUARD COLOR with Spray Unit (HVLP works best with a fine tip).

  7. 2GUARD COLOR needs to be applied approximately 1.5 -2.0 mils thick.

  8. After application, allow the surface to dry. The surface should be dry to the touch in approximately 5 minutes.

  9. Spray apply 2GUARD CLEAR after 2GUARD COLOR is dry to the touch.

2GuardClearGallon2.jpg
bottom of page